Últimos assuntos
Honda HRV mudança assento
2 participantes
Página 1 de 1
Honda HRV mudança assento
desculpe a sua em Inglês, eu pensei id postar isso para ver se isso ajuda ninguém.
Ok, im new here, all i keep seeing is "how do i do this/that" and no one actually seems to be doing it! RAH!
Firstly, for my seat swap, no welding cutting, or anything unsafe/dodgy
parts
DC2/4 and EG Civic Hatch seats (grab what ever you like i prefur black dc2 front seats from the vtir)
Stock Hrv Front seats,
so here we go! seat rail swapping time, dc4 seats onto hrv rails (hopefully)
Unbolt all rails/ metal from the dc/eg seats, so your only left with the back cushion piece and the bottem cushion (with its base etc only remove the rails and the swing hinge)
do the same on the HRV rails, so you just have the hrv rails sitting there, once done, bolt up the base of the dc2 seat to the hrv rails, and then the top section, its really a peice of piss to do
looks great and feels great, and soo much better for cornering
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
seat mounts are roughly 50mm off lenght and 50mm to narrow,
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
the bases are the same, so thats the easy part done, the base of the teg sits further back, and slightly lower and of course has higher sides which hold you in a bit better
the upright wasnt that easy im afraid, theres a bolt where my thumb and index finger is, i looked at the material and the HRV seat is sown up tight. so i used a ratchet ringy, and undone both
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
undoing the bolts where easy until they became loose and the ratchit wasnt ratchinginging properly.
after getting it all undone, the DC4 upright was mounted on the hrv rails,
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
i couldnt get the 14mm bolt into the seat underneath the cushion, so i found the sweet way of removing the fabric, theres a long plastic clip and a zip!, so yea pulled it back, cut a wee hole in the foam for my bolt to fit, and done it up good and proper. slid the fabric back down, did the rest of the bolts up
and test fit. i checked all the relcliner bits before i chucked it in the car.
top back piece is 2cm shorter.
[Tens de ter uma conta e sessão iniciada para poderes visualizar este link]
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
full view, thanks to a full frame 5dmkiii and 16-35mm f2.8 lens on auto mode!! (just needed a point and shoot for this lol)
at that stage i had the drivers stock still in there, so i removed it, and found a 10cd stacker with a cartridge in there!! havent seen the cartridge before, wonder how many cds are in there
Ok, im new here, all i keep seeing is "how do i do this/that" and no one actually seems to be doing it! RAH!
Firstly, for my seat swap, no welding cutting, or anything unsafe/dodgy
parts
DC2/4 and EG Civic Hatch seats (grab what ever you like i prefur black dc2 front seats from the vtir)
Stock Hrv Front seats,
so here we go! seat rail swapping time, dc4 seats onto hrv rails (hopefully)
Unbolt all rails/ metal from the dc/eg seats, so your only left with the back cushion piece and the bottem cushion (with its base etc only remove the rails and the swing hinge)
do the same on the HRV rails, so you just have the hrv rails sitting there, once done, bolt up the base of the dc2 seat to the hrv rails, and then the top section, its really a peice of piss to do
looks great and feels great, and soo much better for cornering
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
seat mounts are roughly 50mm off lenght and 50mm to narrow,
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
the bases are the same, so thats the easy part done, the base of the teg sits further back, and slightly lower and of course has higher sides which hold you in a bit better
the upright wasnt that easy im afraid, theres a bolt where my thumb and index finger is, i looked at the material and the HRV seat is sown up tight. so i used a ratchet ringy, and undone both
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
undoing the bolts where easy until they became loose and the ratchit wasnt ratchinginging properly.
after getting it all undone, the DC4 upright was mounted on the hrv rails,
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
i couldnt get the 14mm bolt into the seat underneath the cushion, so i found the sweet way of removing the fabric, theres a long plastic clip and a zip!, so yea pulled it back, cut a wee hole in the foam for my bolt to fit, and done it up good and proper. slid the fabric back down, did the rest of the bolts up
and test fit. i checked all the relcliner bits before i chucked it in the car.
top back piece is 2cm shorter.
[Tens de ter uma conta e sessão iniciada para poderes visualizar este link]
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
full view, thanks to a full frame 5dmkiii and 16-35mm f2.8 lens on auto mode!! (just needed a point and shoot for this lol)
at that stage i had the drivers stock still in there, so i removed it, and found a 10cd stacker with a cartridge in there!! havent seen the cartridge before, wonder how many cds are in there
Croolies- HR-V user
- Mensagens : 20
Data de inscrição : 08/01/2014
Re: Honda HRV mudança assento
Soo the integra type r seat will fit in our HR-V?
I like the recaro type r seats better.
I like the recaro type r seats better.
EZ- HR-V lover
- Mensagens : 499
Data de inscrição : 18/10/2011
Idade : 31
Localização : ÓBIDOS
Re: Honda HRV mudança assento
no sorry, they will require custom mounts/rails,
the stock dc2 seats still run with the hrv rails. they are far better than hrv seats, the side bolsters are higher and the seat hugs you a bit more.
i have the seats in my khanacross car also thats how much i like them
the stock dc2 seats still run with the hrv rails. they are far better than hrv seats, the side bolsters are higher and the seat hugs you a bit more.
i have the seats in my khanacross car also thats how much i like them
Croolies- HR-V user
- Mensagens : 20
Data de inscrição : 08/01/2014
Re: Honda HRV mudança assento
Cool
Ya the HRV seats don't hug you alot, in hard cornering it's not comfortable.
Ya the HRV seats don't hug you alot, in hard cornering it's not comfortable.
EZ- HR-V lover
- Mensagens : 499
Data de inscrição : 18/10/2011
Idade : 31
Localização : ÓBIDOS
Tópicos semelhantes
» Honda HDS - Cabo profissional para veículos Honda 199 euros
» mudança oleo
» HR-V mudança audio
» Mudança de filtros
» Mudança de oleo diferencial
» mudança oleo
» HR-V mudança audio
» Mudança de filtros
» Mudança de oleo diferencial
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos
|
|
Sáb 16 Mar 2024 - 1:42 por fdias
» Comandos das portas
Sáb 2 Mar 2024 - 16:41 por fdias
» Sonda de temperatura de gases
Sex 26 Jan 2024 - 3:12 por Carlos Francisco
» Rádio com AUX
Qua 17 Jan 2024 - 23:15 por fdias
» Ventilador e AC
Qui 4 Jan 2024 - 10:36 por Paulo Rui Silva
» Porcas Segurança Roda
Qua 6 Dez 2023 - 15:53 por Paulo Messias
» Roubo Catalisador
Ter 21 Nov 2023 - 13:03 por JD16W1
» Manual de manutenção
Seg 16 Out 2023 - 17:33 por fdias
» Central multimedia HRV 2017
Qua 20 Set 2023 - 10:44 por micasbond
» Óleo da marca SUNOCO 10W40
Ter 12 Set 2023 - 1:32 por LandFreitas
» Barras de tejadilho HRV Ano 2000 - 5portas
Ter 11 Jul 2023 - 18:44 por Pmartj
» Medida da furacão
Seg 1 maio 2023 - 20:24 por Ramiro Santos
» Erros P0132 e P0443 e Travões, Como resolver?
Sex 24 Fev 2023 - 23:09 por fdias
» Temperatura do anticongelante no motor D16W1
Sex 24 Fev 2023 - 22:46 por fdias
» Óleo de motor escuro após uns 3000km
Sáb 18 Fev 2023 - 1:22 por JD16W1
» Hrv ora pega, ora não pega !!!
Qua 8 Fev 2023 - 0:56 por Anualmix
» Oleo de motor recomendado
Ter 31 Jan 2023 - 16:47 por fdias
» OBDII and Torque
Qui 5 Jan 2023 - 0:12 por fdias
» Sensor temperatura gases de escape - Honda HRV 1999 VTEC
Ter 3 Jan 2023 - 19:48 por JSilva
» Radiador HRV
Seg 2 Jan 2023 - 23:12 por berthier